8000 series cycloid reducer: planetary transmission principle is an application of the reduction mechanism cycloid engagement, state-of-the-art design, novel structure.
This reducer has been replaced in most cases two, three ordinary cylindrical gear reducer and cylindrical worm reducer, military, aerospace, metallurgy, mining, petroleum, chemical, shipbuilding, light industry, food, textile, printing and dyeing, pharmaceutical, rubber, plastic, and lifting and transport has been an increasingly wide range of applications.
Product Features:
A high transmission efficiency. Since the engaging portion with a rolling engagement, generally a transmission efficiency of 90% - 95%.
Transmission ratio. A deceleration gear ratio is 1/6--1/87. The double reduction the transmission ratio 1/99--1/7569; transmission ratio of the transmission of the three 1/5841--1/658503. Also needed multistage combination speed ratio reaches a specified size.
Compact structure, small size, light weight. Compared to the volume and common cylindrical gear reducer can reduce 2/1--2/3.
Less failure, and long life. GEARING pieces to use bearing steel the grinding manufacturing, mechanical properties and wear resistance are good, but also because of its rolling friction, and thus less failure, long life.
5. Smooth and reliable operation. Transmission process for multi-tooth meshing, so as to make operation smooth and reliable, low noise.
6. Strong overload capacity, impact resistance, low moment of inertia applied to starting of frequent and reversing operation.
Easy disassembly, and easy maintenance.
8000 series cycloid reducer conditions of use:
An output shaft and the input shaft on the shaft of the key type and dimensions of of GB/T1096 ordinary flat key.
Apply to operate continuously, allow positive and reverse operation.
3. Vertical reducer output shaft should be vertical down using the Model 8155 following grease lubrication, can be used horizontally.
4 horizontal double-axle gearbox output shaft should be in a horizontal position, must be inclined to use when contact with the manufacturer.
Lubrication way table.
The machine models lying legislation Model lying legislation
8075 to 8155 grease 8075A ~ 8145C grease
8160 to 8185 oil bath type piston pump 8160A ~ 8227A oil bath gear pump
8190 to 8275 gear pump
6) lubricant use an ambient temperature of -10 ~ 50 ° C, in excess of the temperature range, please contact with the manufacturer.
Detailed selection parameters, please download the Product Selection Guide View:【Download】 Weigao Transmission Tel :+86 571 87870681
